Pilot Scale Spray Dryer

1.high quality 2.high efficiency 3.passed the ISO9001:2008 international quality management system authentication Working Principle:Air goes through filtration and heating, enters into air distributor in the top of dryer, then the hot air spirally and evenly enters into dryer. Feed liquid is rotated spraying into extremely slight mist shape droplet via high speed centrifugal atomizer which in the top of the tower, then it parallelly contacts with hot air, drying to finished products in a very short time. Finished products continuously output by drying tower bottom and cyclone separator, and waste gas is excluded by draught fan.  Technical Parameters:

Model No.	Parameter Item	Parameter Index
XO-LPG2	Maximum evaporative water	2000ml/h
	Entering air temp.	30~250°C; ±1°C
	Leaving air temp.	30~120°C
	Dry air flow	Normal flow: 70m3/h (Max.: 330m3/h):pressure: 686Pa;
	Blower power	0.1KW/220V;frequency control of motor speed
	Piping electric heater ability	3.2KW/220V
	Entering air temp. heating contrl	PT-100,intelligent PID control;
	Spraying system	With standard 0.7 mm diameter double fluid nozzle (other dimensions optional);
	Operating system	POTO22PAC microprocessor
	Average drying time	1.0~1.5 seconds
	Automatically exclude jams device	Automatically exclude jam with needle, cycle range:0~60Sec.per time;frequency adjustable;
	Contact product materials	Antiacid 316 stainless steel, 3.3 high-borosilicate glass;
	Dimensions(H×W×D)	1100×700×650mm
	Power source	220/230V,50~60Hz
	Machine rated power	3.8KW/220V
	Weight	58kg

Pilot Scale Spray Dryer